WHITE BROWN DA 918 Manual de usuario Pagina 33
- Pagina / 127
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
1-24 | ni.com
Chapter 1 Getting Started with the cDAQ Chassis
Figure 1-14. DIN Rail Clip Parts Locator Diagram
Caution Remove the I/O module before removing the chassis from the DIN rail.
NI cDAQ-9184/9188
Use the NI 9912 DIN rail kit to mount the NI cDAQ-9184 chassis on a DIN rail. Use the NI 9915
DIN rail kit with the NI cDAQ-9188 chassis on a DIN rail.
Each DIN rail mounting kit contains one clip for mounting the chassis on a standard 35 mm DIN
rail. To mount the chassis on a DIN rail, fasten the DIN rail clip to the chassis using a number 2
Phillips screwdriver and two screws included in the kit. The NI cDAQ-9184 uses two M4 × 22
screws. The NI cDAQ-9188 uses two M4 × 17 screws.
Make sure the DIN rail kit is installed as shown in Figure 1-15. Clip the chassis onto the DIN
rail with the larger lip of the DIN clip positioned up, as shown in Figure 1-14. When the DIN rail
kit is properly installed, the cDAQ chassis is centered on the DIN rail.
Figure 1-15. NI cDAQ-9184/9188 DIN Rail Installation
Caution Remove the I/O module(s) before removing the chassis from the DIN rail.
1 DIN Rail Clip 2 DIN Rail Spring 3 DIN Rail
1
2
3
- -918x/919x 1
- Legal Information 3
- Export Compliance Information 4
- Contents 5
- Chapter 3 6
- Chapter 4 7
- Chapter 5 7
- Counters 7
- © National Instruments 9
- Getting Started with the 10
- NI cDAQ-9184 Chassis 11
- NI cDAQ-9188 Chassis 11
- Safety Guidelines 12
- 1-4 13
- Hardware Symbol Definitions 14
- Unpacking 14
- Installing the cDAQ Chassis 14
- 1-6 15
- © National Instruments 16
- 1-8 17
- <network> 18
- 1-10 19
- MAX Icons and States 20
- 1-12 21
- Reserving the Chassis in MAX 23
- QoS Priority 23
- Mounting the cDAQ Chassis 24
- NI 9901 Desktop Mounting Kit 25
- NI cDAQ-9181/9191 26
- 1-18 27
- © National Instruments 28
- NI cDAQ-9184/9188 29
- © National Instruments 30
- NI cDAQ-9184 31
- NI CompactDAQ 31
- NI cDAQ Chassis Features 34
- LED State/Chassis Status 35
- © National Instruments 36
- Ethernet Cabling 37
- Reset Button 38
- Power Connector 38
- PFI BNC Connectors 38
- Cables and Accessories 39
- Using the cDAQ Chassis 40
- 1-32 41
- © National Instruments 42
- Analog Input 43
- AI Sample Clock Signal 44
- Scanned Modules 45
- Sigma-Delta Modules 45
- AI Start Trigger Signal 46
- AI Reference Trigger Signal 47
- AI Pause Trigger Signal 48
- Using an Analog Source 49
- Analog Output 50
- Hardware-Timed Generations 51
- Analog Output Timing Signals 52
- AO Start Trigger Signal 53
- AO Pause Trigger Signal 54
- for more 55
- Digital Input/Output and PFI 56
- Static DIO 57
- Digital Input 57
- Using an Internal Source 58
- Using a Digital Source 59
- Using an External Source 59
- Change Detection Event 62
- Digital Output 63
- Buffered Digital Output 64
- Digital Output Timing Signals 65
- PFI Filters 68
- PFI Filter Example 69
- Counter Timing Engine 71
- Counter Input Applications 72
- 10763 452 73
- Pulse-Width Measurement 74
- Latched Value 75
- Pulse Measurement 76
- Single Pulse Measurement 77
- Semi-Period Measurement 78
- Frequency Measurement 79
- © National Instruments 80
- 5-12 81
- Chapter 5 Counters 81
- © National Instruments 82
- 5-14 83
- Frequency Measurement Methods 84
- Which Method Is Best? 85
- © National Instruments 86
- Period Measurement 87
- Position Measurement 88
- Channel Z Behavior 89
- Buffered Position Measurement 90
- 000123 4567880 8 91
- © National Instruments 92
- Counter Output Applications 93
- Pulse Train Generation 94
- 4 3 210210 43 210210 95
- 5-28 97
- Counter Armed 98
- Frequency Generation 99
- Frequency Division 100
- Counter Timing Signals 101
- Counter n Source Signal 102
- Counter n Gate Signal 103
- Counter n Aux Signal 104
- Counter n Sample Clock Signal 105
- Counter n Up_Down Signal 105
- Counter n HW Arm Signal 105
- Frequency Output Signal 106
- Default Counter/Timer Routing 107
- Counter Triggering 107
- Other Counter Features 108
- 80 MHz Source Mode 109
- Digital Routing and Clock 110
- Generation 110
- 80 MHz Timebase 111
- 20 MHz Timebase 111
- 100 kHz Timebase 111
- NI cDAQ-9191 Regulatory 112
- Information 112
- A-2 113
- EU Regulatory Statements 114
- Singapore 115
- *0107898581340997* 116
- Where to Go from Here 117
- NI-DAQmx 118
- LabWindows/CVI 118
- Measurement Studio 119
- Training Courses 120
- Technical Support on the Web 120
- Technical Support and 121
- Professional Services 121
- C-2 122
- Numerics 123
- I-2 124
- NI cDAQ-918x/919x User Manual 125
- © National Instruments 125
- I-4 126
- © National Instruments 127
© 2020, manymanuals.es. Todos los derechos reservados | 0.084 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales